Samsung To Unveil New AI-Connected Living Lineup at CES 2026

1 AI Wash & Dry+’s detection and sensing capabilities are based on our deep learning models trained using predefined set of data and may yield inaccurate or incorrect results. New datasets may be introduced to our learning models from time to time to enhance its accuracy.

2 Based on AI-based algorithm and internal testing using the AI Wash & Dry+ cycle on an IEC 3kg load. A turbidity sensor operates for all weights, while fabric sensing operates for 3kg and under. It is capable of recognizing Outdoor, Denim, Normal, Towel, and Delicates.Actual results may vary depending on individual use.

3 Based on testing by the preclinical laboratory of the College of Pharmacy, Korea University. Test method: attach a cotton fabric (8×8cm) contaminated with a virus to 5 shirts and run the Sterilization course. Result: reduces 99.9% of certain viruses, including Influenza A, Adenovirus, Infectious canine hepatitis virus (ICHV), Coronavirus, Porcine epidemic diarrhea virus (PEDV), Herpes, Infectious bovine rhinotracheitis virus (IBRV), Enterovirus, Rhinovirus, Rotavirus, Influenza B, Hepatitis A and Norovirus. Results may vary depending on the actual usage environment.

4 Based on testing by Intertek. Test method: attach a cotton fabric (10×10cm) contaminated with bacteria to 5 shirts and run the Sterilization course. Result: reduces 99.9% of certain bacteria, including Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, MSRA, Pneumococcus, Diphtheria, Legionella and urinary tract infection. Results may vary depending on the actual usage environment.

5 Based on internal testing. Results provided to and interpreted by Intertek. When Normal and Bulky Care mode is operated, odor concentration is reduced by over 99% (the average deodorization rate of 17 gases). Results may vary depending on the actual usage environment.

6 Auto Cycle Link is only available when both the AirDresser and washer have Wi-Fi connected and are registered on the SmartThings App. A Wi-Fi connection is required at all times, which may increase energy consumption. Not available on certain models and in certain regions.

7 To use AI Auto Cooling a Wi-Fi connection and Samsung account SmartThings are required.

8 Based on an internal Samsung survey of consumers across Brazil, India, Korea, Italy, Thailand and Turkey.

9 Based on internal testing on the AR70H12CAAWNEU compared with the Samsung conventional AQ12EASER model.

  – Installation area of 68㎥ at 35℃, standard outdoor cooling condition.

  – Time taken for indoor temperature to drop from 33℃ to 25℃ in Max mode.

  – values may vary depending on the actual testing conditions and environment.

10 Based on internal testing on the AR70H12CAAWNEU compared with the old AR12TXCAAWKEU model

   – Installation area of 326㎥ (positioned at 2m height) at 35℃, standard outdoor cooling condition.

   – Distance of airflow reach measured during cooling operation, at maximum airflow and the highest blades position setting.

11 The SmartThings server stores user data, preferences and usage patterns to suggest the most useful options.

12 The testing was conducted in Samsung’s 132m² residential environment laboratory at a temperature of 35°C/24°C (dry bulb/wet bulb, KS C 9306: air conditioner). Results provided to and interpreted by Intertek, comparing the power consumption between AI Energy Mode being on and off in AR07D9181HZN model’s AI comfort mode. Actual savings may vary by usage patterns and environment and the set temperature may increase by up to 2 degrees. Requires the use of the SmartThings App and a Samsung account.

13 Based on our deep learning model trained using a predefined set of data and may yield incomplete or incorrect information. New datasets may be introduced to our learning model from time to time to enhance its accuracy.

14 Only recognizes a human presence based on generic visual indicators, and cannot identify individual people. Recognition capabilities may be limited when a person’s entire body cannot be seen. A Wi-Fi connection and Samsung account are required.

15 Only recognizes a pet presence based on generic visual indicators, and cannot identify individual pets. Recognition capabilities may be limited by the posture or position of a cat. The ability to recognize your pet may vary depending on the type of animal and the living environment. A Wi-Fi connection and Samsung account are required.

16 A liquid spill is defined as a colored or transparent liquid, such as water or juice, having a size of 2.8 in x 2.8 in (0.5 oz. or 15ml in volume) or larger. Identification may be affected by the size of the stain or the environmental conditions of the floor, such as the floor pattern. Identification may be affected by the size of the liquid or the environmental conditions of the floor, such as the floor pattern, color of the floor, direct or reflected light, or shape of the liquid. Excessive amounts of liquid on the floor may cause secondary contamination.

17 Based on internal testing, Jet Bot Steam’s highest crossing height for a vertical, single tier threshold is 1.8 inches. It can also cross thresholds up to 2.4 inches high, including 1.8 inches threshold with an additional 0.6 inches height. The gap between thresholds should be greater than 3.5 inches. Results may vary depending on actual usage conditions. The Climb Zone must be set beforehand via SmartThings to use this feature. A Wi-Fi connection and a Samsung account are required.